Handheld OWON HDS1021M-N Digital Oscilloscope FFT Waveform Record & Replay SCPI

Description

OWON HDS1021M-Ndigital oscilloscope
Product Series : Handheld DSO
Main Features
- 2 in 1 (DSO + Multimeter)
- Auto-scale Function
- FFT
- 20 group automatic measurement options
- Bandwidth : 20MHz
- USB data transmission supported
- Multimeter newly supported SCPI
- Rechargeable Li-ion battery (6 hours' backup)
- Waveform record & replay
Application
electronic circuit debugging
circuit testing
design and manufacture
education and training
automobile maintenance and testing
Performance Specifications
Model
HDS1021M-N
Bandwidth
20MHz
Sample  Rate (real time )
250mS/s
Horizontal  Scale (s/div)
5ns/div~100s/div, step by 1~2.5~5
Rise  Time (at input, typical)
≤ 17.5ns
Display
3.7 inch color  display with TFT panel (640 × 480 pixels, 65535 colors)
Channel
singel
Input  Impedance
1MΩ ± 2%, in parallel with 15pF ± 5pF
Record  Length
max 6K points  on each channel
Interpolation
sin (x) / x
Probe  Attenuation Factor
1X,10X,100X,1000X
Input  Coupling
DC, AC, and GND
DC  Accuracy (average)
average >16  : ±(5% reading + 0.05div) for V
Vertical  Sensitivity
5mV/div~5V/div (at input)
Vertical  Resolution (A/D)
8 bits (2  channels simultaneously )
Max  Input Voltage
400V (PK - PK)  (DC + AC, PK - PK, 1MΩ input impedance, probe attenuation 10 : 1), CAT  II
Trigger  Type
Edge, Video,  Alternate
Trigger  Mode
Auto, Normal,  Single
Trigger  Level
±6 divisions  from screen center
Acquisition  Mode
Sample, Peak  Detect, and Average
DC  Gain Accuracy
±3%
Waveform  Math
+, -, ×, ÷, invert, FFT
Waveform  Storage
4 waveforms
Lissajous
Figure
Bandwidth
full bandwidth
Phase  Difference
±3 degrees
Communication  Interface
USB
Power  Supply
100V-240V AC,  50/60Hz
Li-ion  Battery
7.4V, 6 hours  operation
Dimensions (W × H × D)
180 × 115 × 40  (mm)
Weight (without package)
645 g
MultimeterSpecifications
Full Scale Reading
3  .3/4digits(max4000 count)
Diode
0V-1.5V
Input Impedance
10MΩ
On/Off Test
<50(+-30)beeping
Voltage
VDC : 400mV, 4V,  40V, 400V, 1000V : ±(1% ± 1 digit); max input : DC 1000V
VAC : 4V, 40V, 400V  : ±(1% ± 3 digits), 750V : ±(2% ± 3 digits); Frequency : 40Hz - 400Hz;
max input : AC 400V  (virtual value)
Current
DC : 40mA, 400mA :  ±(1.5% ± 1 digit), 20A : ±(3% ± 3 digits)
AC : 40mA : ±(1.5% ±  3 digits), 400mA : ±(2% ± 1 digit), 20A : ±(5% ± 3 digits)
Impedance
400Ω : ±(1% ± 3  digits), 40ΚΩ - 4ΜΩ : ±(1% ± 1 digit), 40MΩ : ±(1.5% ± 3 digits)
Capacitance
51.2nF~100uF : ±(3% ±  3 digit)