SmallHD INDIE 7 On-Camera Monitor Kit with KOMODO Control Enabled [Open Box]

Description

The SmallHD Indie 7 monitor has the Komodo Control license activated, and is in open box condition, without any physical wear. It was purchased from B&H several months ago. Everything has been tested and work flawlessly with the Komodo.
Note that the monitor will come with the 18'' DSMC2 control cable (2pin) and an extra 36'' DSMC2 control cable (2pin) to work with the Komodo expander module rather than the Komodo cable (5pin to 9pin) listed on the official website. Both the kit and the extra cable were purchased from B&H a few months ago, but haven't been used except for testing the setup.
If you do not have the expander module, then you will need to get the 5pin to 9pin control cable, like this one here: https://www.bhphotovideo.com/c/product/1598173-REG/smallhd_cblcntrlredkomodo18_camera_control_cable_for.html
For clarification, here is the Expander module/DSMC2 control cable: https://www.bhphotovideo.com/c/product/1574074-REG/smallhd_cbl_cntrl_red_dsmc2_36_36_camera_control_cable.html/overview
When connected to the camera via the control cable, the monitor will detect the signal and then you can select to link the two.
Will ship via UPS ground.